Siemens ISI EN 50295 - Manual (Page 80)

Siemens IK PI · 2004 6/80
AS-Interface Slaves
SlimLine
I/O modules for operation in IP20 control cabinet
6
■
Technical specifications (continued)
2 inputs/2 outputs 2 inputs/2 outputs 2 inputs/2 outputs
Screw-type connection Screw-type connection Spring-loaded connection
Standard slave Standard slave Standard slave
2-wire 2-wire 2-wire
PNP transistor (2 A) Relay PNP transistor (2 A)
3RK1 400-0BE00-0AA2 3RK1 402-0BE00-0AA2 3RK1 400-0BG00-0AA2
Total current input in mA £ 50 £ 50 £ 50
Inputs
• Sensor supply via AS-Interface Short-circuit and overload with-
stand capability Short-circuit and overload with-
stand capability Short-circuit and overload with-
stand capability
• Voltage range in V 20 to 30 20 to 30 20 to 30
• Current carrying capacity
for sensor supply in mA
-- -- --
• Connection of sensors 2-wire system 2-wire system 2-wire system
• Switching level High in V ³ 10 ³ 10 ³ 10
• Input current Low/High in mA £ 1.5 / ³ 5 £ 1.5 / ³ 5 £ 1.5 / ³ 5
Outputs
• Type of output PNP transistor Relay PNP transistor
• Current carrying capacity
per output in A DC 12 / DC 13 typ.
2 -- 2
• Maximum summation current
per module in A
4 -- 4
• Short-circuit protection Built-in External back-up fuse Built-in
• Inductive interference protection
(free-wheeling diode)
Built-in Not applicable Built-in
• Polarity reversal protection Not built-in Not applicable Not built-in
• External 24 V DC supply voltage Via terminals:
Terminal 7 = "+“
Terminal 10 = "-“ Not applicable Via terminals:
Terminal 7 ="+“
Terminal 10 = "-“
• I
th
-- 6 --
• AC-15 -- 3 --
• DC 13 24 V -- 1 --
• DC 13 110 V -- 0.2 --
• DC 13 230 V -- 0.1 --
• Watchdog Built-in Built-in Built-in
I/O configuration 3 3 3
ID/ID2 code 0/F 0/F 0/F
Assignment of data bits
• Data bit D0 IN1 IN1 IN1
• Data bit D1 IN2 IN2 IN2
• Data bit D2 OUT1 OUT1 OUT1
• Data bit D3 OUT2 OUT2 OUT2
Connection Screw terminals Screw terminals Spring-loaded terminal connection
Conductor cross-sections in mm
2
-- -- Solid: 2 ´ (0.25–1.5)
Finely stranded with end sleeve:
2
´ (0.25–1)
Finely stranded without end sleeve:
2
´ (0.25–1.5)
AWG conductor connections solid
or stranded: AWG 2
´ (24–16)
Note -- -- Disassembly tool for spring-
loaded terminal connection:
See accessories