Siemens ISI EN 50295 - Manual (Page 61)

Siemens IK PI · 2004 6/61
AS-Interface Slaves
I/O modules for operation in the field
Digital I/O modules IP67 - K45
6
■
Selection and Ordering data
1) The typical current carrying capacity per output increases with Version "E12“ from 1.5 to 2 A (available from approx. 07/2003).
2) Start of delivery approx. end of 2003.
Design Order No.
3RK1 400-0GQ20-0AA3
Digital I/O modules IP67 - K45
PNP transistor
Current loading capacity of inputs: 200 mA
Modules supplied without mounting plate.
Type Current load-
ing capacity
of outputs Slave
type Pin
assign-
ments
Connection
technique
4 inputs -- Standard Standard M12 3RK1 200-0CQ20-0AA3
M8 screws 3RK1 200-0CT20-0AA3
M8 snap-on 3RK1 200-0CU20-0AA3
A/B M12 3RK2 200-0CQ20-0AA3
M8 screws 3RK2 200-0CT20-0AA3
M8 snap-on 3RK2 200-0CU20-0AA3
2 x 2 inputs -- A/B Y M12 3RK2 200-0CQ22-0AA3
2 inputs/2 outputs 2 A 1 ) Standard Standard 3RK1 400-1BQ20-0AA3
2 x (1 input / 1 output) 0.2 A Y 3RK1 400-0GQ20-0AA3
4 outputs 1 A Standard 3RK1 100-1CQ20-0AA3
3 outputs A/B 3RK2 100-1EQ20-0AA3
2 outputs / 2 inputs 2 ) new 2 A 3RK2 400-1BQ20-0AA3
Accessories
3RK1 901-2EA00
K45 mounting plate
• For wall mounting 3RK1 901-2EA00
• For mounting onto standard rails 3RK1 901-2DA00
3RK1 901-1NN00
Distributor
For AS-Interface flat cable
Supplied inclusive of special mounting plate
Seals (3RK1 902-0AR00) are only necessary when a cable
must end in the distributor and must be ordered separately 3RK1 901-1NN00
3RK1 901-1KA00
3RK1 901-1PN00
AS-Interface sealing caps
(one set contains ten sealing caps)
• For spare M12 sockets 3RK1 901-1KA00
• For spare M8 sockets 3RK1 901-1PN00
3RK1 901-1MN00
Cable end piece
For sealing open cable ends (of the shaped AS-Interface cable) in IP67
(one set contains ten cable end pieces) 3RK1 901-1MN00
3RK1 902-0AR00
Sealing set
For K60 mounting plate and distributor
Cannot be used for K45 mounting plate
(one set contains five straight and five shaped seals) 3RK1 902-0AR00