Siemens ISI EN 50295 - Manual (Page 134)

Siemens IK PI · 2004 6/134
AS-Interface Slaves
AS-Interface for LOGO!
6
■
Overview
Each LOGO! now connectable to the AS-Interface system
-new- With the AS-Interface for LOGO! an intelligent slave can be inte-
grated into the AS-Interface system. Modular integration permits
different basic units to be integrated into the system whenever
the functionality is required. The functionality can also be quickly
and easily adapted to changing requirements by replacing the
basic unit
The interface provides four inputs and four outputs for the sys-
tem These I/Os, however, are not actually implemented in hard-
ware; they only exist virtually via the interface on the bus
■
Technical specifications
■
Selection and Ordering data
Supply voltage in V 24 V DC
Inputs/outputs 4 / 4
(virtual inputs / outputs)
Bus connection AS-Interface according to specification
Ambient temperature in °C 0 to +55
Degree of protection IP20
Mounting onto standard mounting rail
Dimensions (W x H x D) in mm 36 x 90 x 58
Display of LEDs LEDs Status
green OK
red No data traffic
red/yellow flash Zero address
Design Order No.
3RK1 400-0CE10-0AA2
AS-Interface connection for LOGO! 3RK1 400-0CE10-0AA2