Silex technology Embedded Intelligent Module SX-560 - Manual (Page 93)

Console Commands Silex Page 87
Part Number 140-00192-100
Command Description
SET IP TCP [ENable | DIsable]
SET IP TELnet Enables or disables Telnet protocol
The default value is Enable.
Format:
SET IP TELnet [ENable | DIsable]
SET IP TFTP Enables or disables TFTP protocol
The default value is Enable.
Format:
SET IP TFTP [ENable | DIsable ]
SET IP TImeout Sets TCP inactivity timeout.
If fast timeout is enabled, the timeout is calculated as seconds.
If fast timeout is disabled, the timeout is calculated as minutes.
The default value is 1 minute.
Format:
SET IP Timeout n