Silex technology Embedded Intelligent Module SX-560 - Manual (Page 85)

Console Commands Silex Page 79
Part Number 140-00192-100
Command Description
CLEAR PORT S1
JOB Aborts the active job on the port.
If the remote host is connected, additional data received will be discarded.
Format:
CL PORT S1 JOB
SET PORT S1
FLOW Sets serial port flow control to NONE, XON/XOFF, CTS, or DSR
The default value is none.
Format:
SET PORT S1 FLOW
SET PORT S1
PARITY Sets serial port parity to NONE, EVEN, ODD, MARK, or SPACE
The default value is none.
Format:
SET PORT S1 Parity
SET PORT S1
SIZE Sets data bits on the serial port
The default value is 8.
Format:
SET PORT S1 SIZE [7 | 8]
SET PORT S1
Speed Sets serial port baud rate. Options for BAUD are 300, 600, 1200, 2400, 7200, 9600,
19200, 38400, 57600, 115200, 230400, 460800, 921600
The default value is 115200.
Format:
SET PORT S1 SPEED
SET PORT S1
STOP Sets serial port stop bits per character
The default value is 1.
Format:
SET PORT S1 STOP [1 | 2]
Server Information Commands
Table 36 Server Information Commands
Command Description
SET SERVEr
Description Sets server description string
Format:
SET SERVEr DEscription
SET SERVEr NAme Sets server node name
The default value is TWC_xxxxxx, where xxxxxx are the last 6 hex digits of the
MAC address.
Format:
SET SERVEr NAme