Silex technology Embedded Intelligent Module SX-560 - Manual (Page 89)

Console Commands Silex Page 83
Part Number 140-00192-100
Command Description
SET SERVI name> TCP Sets raw TCP port for service
If port number is 0, raw TCP is disabled on service.
The default value is 9100 for service 1, 3001 for service 2.
Format:
SET SERVI TCP nn
SH SERVI SUMmary
[service_num] Shows the basic parameters for a specific service. If service_num is not
provided, parameters for all services are displayed.
The command SH SERVI displays the same data as SHOW SERVI SUM.
SNMP Commands
Table 38 SNMP Commands
Command Description
SET SNMP GETCOMM* Gets community name
The default value is public.
Format:
SET SNMP GETCOMM
SET SNMP JETADmin Enables or disables JetAdmin compatibility
The default value is enabled.
Format:
SET SNMP JETADmin [ ENable | DIsable]
SET SNMP
SETCOMM1* Sets community 1 name
The default value is internal?
Format:
SET SNMP SETCOMM1
SET SNMP
SETCOMM2* Sets community 2 name
The default value is Pass.
Format:
SET SNMP SETCOMM2
SET SNMP CONtact Sets system contact string
The default value is null.
Format:
SET SNMP CONtact