Silex technology Embedded Intelligent Module SX-560 - Manual (Page 79)

Console Commands Silex Page 73
Part Number 140-00192-100
Appendix B
Console Commands
The following tables describe the console commands available from the internal command console.
Access the command console through Serial Port 1, Serial Port 2, the console port, or over the network
using a Telnet session or a web browser (use the SX-560 Console Mode Switching or AT commands as
described in Chapter 6 to send console commands to Serial Port 1 and Serial Port 2).
Wireless and Network Security Commands
The following group of commands configures network parameters.
Table 34 Network Commands
Command Description
SH NW Displays summary network information
Sample output:
WiFi Mode = INFRASTRUCTURE
WiFi SSID: silex
Speed = 11
Regulatory Domain = 704
WiFi FW Ver = 1F 1.7.1
AP density = LOW
TTLS is Disabled
WEP is Disabled
Link DOWN
SH NW SQ Display wireless network signal quality
Sample Output::
Signal Quality = 93
Signal Strength = 53
Noise Level = 135