Silex technology Embedded Intelligent Module SX-560 - Manual (Page 81)

Console Commands Silex Page 75
Part Number 140-00192-100
Command Description
SET NW MOde Sets WLAN mode
The possible modes are Infrastructure and Ad-Hoc; the default value is Ad-Hoc
Format:
SET NW MOde
SH NW MODE Shows wireless operating mode
Sample output:
Wifi mode = AD-HOC (802.11)
SH NW RADio Shows the selected radio mode of operation
Sample output:
Radio mode is 802.11b-g
SET NW SPeed Sets maximum WLAN speed
Possible values are 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, and 1; the default value
is 54.
Format:
SET NW SPeed n
SH NW SPEED Show the maximum wireless data speed in megabits per second
Sample output:
Speed = 54
SET NW SSid Sets WLAN SSID
The default value is serserv.
Format:
SET NW SSid
CL NW SSid Clears SSID value and allows the server to connect to any AP.
Format:
CL NW SSid
SET NW BSsid Sets WLAN BSSID to connect to a specific access point’s mac address
Format:
SET NW BSsid
CL NW BSsid Clears BSSID value and allows the server to use SSID, not a specific AP
Format:
CL NW BSsid
SET NW RTS Sets WLAN RTS threshold
The possible values are between 1 and 3000; the default value is 2432.
Format:
SET NW RTS n
SH NW RTS Shows wireless RTS threshold
Sample output:
Wifi RTS Threshold = 2432