Silex technology Embedded Intelligent Module SX-560 - Manual (Page 88)

Page 82 Silex Console Commands
Part Number 140-00192-100
Command Description
SET SERVI name> FMS Sets filter 1 text replacement match string index.
If the index is zero, the default string of (line feed) is used.
The default value is 0.
Format:
SET SERVI FRM nn
SET SERVI name> FRS Sets filter 1 text replacement replace string index.
If the index is zero, the default string of (carriage return-line feed) is
used.
The default value is 0.
Format:
SET SERVI FRS nn
SET SERVI name> IP Enables or disables IP based jobs such as lpd, raw tcp and ftp, on the service
The default value is enabled for service 1 and 2, disabled for all others.
Format:
SET SERVI IP [ENable | DIsable]
SET SERVI name> NAme Changes service name
The default value varies by service
Format:
SET SERVI NAme
SET SERVI name> POrt Sets output port associated with a service
The default value is S1.
Format:
SET SERVI POrt
SET SERVI name> PRIority Sets priority for service for multiple service transmissions simultaneously
The default value is 10.
Format:
SET SERVI PRIority nn
SH SERVI PRI
[service_num] Shows priority of service.
If service_num is not provided, the priority of all services is listed.
SET SERVI name> RECeive Sets receive only mode for a service
This option is required only for host applications that do not operate properly
if data is received from the serial device.
The default value is disabled.
Sample output:
SET SERVI RECeive [ENable |
DIsable]