Silex technology Embedded Intelligent Module SX-560 - Manual (Page 90)

Page 84 Silex Console Commands
Part Number 140-00192-100
SET SNMP LOCation Sets system location string
The default value is null.
Format:
SET SNMP LOCation
SH SNMP Shows state of SNMP protocol enable
Sample output:
SNMP is Enabled
*Not implemented in early releases of SX-560 firmware.
String Commands
Table 39 String Commands
Command Description
SET STRing Set service string table entry
String 1 to11 cannot be set or changed.
Format:
SET STRing ”value”
CL STRing Clears the service string table entry
Format:
CL STRing
SH STRing
[string_num] Defines the BOT and EOT strings used in services
If string_num is provided, then the specific string definition and expansion are
displayed. If string_num is not provided, then all string definitions are displayed
without their expansions.
Sample output:
1:
2: \1BE
3: \04
4: \1B%-12345X
5: @PJL
6: ENTER LANGUAGE=
7: PCL\0A
8: POSTSCRIPT\0A
9: \FF\04\FF\05\FF\06\FF\07
10: \FF\04\FF\05\FF\06\FF\08
11: \0C
SH FILters Shows the filters that can modify a job stream
Sample output: