Samsung D-44867 - Manual (Page 172)

158 3B. Web and Data Services
To turn 4G off:
1. Press > > >
Wireless & networks > 4G settings.
2. Tap 4G to remove the green checkmark and
deactivate 4G services.
Sprint Mobile Hotspot
Sprint Mobile Hotspot allows you to turn your phone
into a Wi-Fi hotspot. The feature works best when used
in conjunction with 4G data services (although 3G
service can also be used). (See “4G Services” on
page 156.)
To set up your Sprint Mobile Hotspot:
1. Press and tap > ( Sprint
Hotspot ).
2. Tap Sprint Hotspot and place a checkmark in the
adjacent field to activate the service.
Ⅲ Using both 4G service and Hotspot drains your
device’s battery at a much faster rate than when
using any other feature combination.
To connect to the Sprint Mobile Hotspot:
1. Enable Wi-Fi (wireless) functionality on your target
device (laptop, media device, etc.).
2. Scan for Wi-Fi networks from the device and select
your Conquer 4G™ hotspot from the network list.
Ⅲ The default name for your Conquer 4G™ hotspot
is
SPH-D600XXX . You can change the name by
tapping Sprint Hotspot Settings > Router name
from the Sprint Hotspot screen.
3. Select this device and follow your onscreen
instructions to enter the passkey (provided on the
Sprint Hotspot page).
4. Launch your Web browser to confirm you have an
Internet connection.
Note: Use of 4G communication and Sprint Mobile Hot Spot
service can cause an added drain to your battery and
reduce your battery use times.
Note: The best way to keep using the device as a hotspot is
to have it connected to a power supply.
Important: Write down the passkey (password) for this WPA
communication (shown onscreen).
SPH-D600.book Page 158 Thursday, June 9, 2011 10:33 AM