Samsung D-44867 - Manual (Page 77)

2C. Settings 63
Setti
ngs
Vibrate
To set your device to vibrate for incoming calls and silent
for notifications:
ᮣ Press the volume button down in standby mode
until you see
on the screen.
To set your device to vibrate for incoming calls:
1. Press > > > Sound .
2. Tap Vibrate and select Always , Never , Only in Silent
Mode , or Only when not in Silent mode . (If you have
already checked the option, tapping it again
deselects the option.)
To set your device to vibrate while using the dialpad and
making onscreen selections:
1. Press > > > Sound .
2. Tap Haptic feedback . (If you have already checked
the option, tapping it again deselects the option.)
Ⅲ This provides a physical feedback when
interacting with the onscreen options.
External Speakers
You can select whether or not your device uses the
external speaker system while on a docking charger.
To set your device to use external speakers when docked:
1. Press > > > Dock .
2. Tap Audio output mode. (If you have already
checked the option, tapping it again deselects the
option.)
Silent Mode
The Silence All option allows you to mute all sounds
without turning your device off (except for Media
volume).
To activate Silence All:
ᮣ Press and hold the volume button down in standby
mode until you see
on the screen.
To deactivate Silence All:
ᮣ Press the volume button up repeatedly to select a
volume level.
SPH-D600.book Page 63 Thursday, June 9, 2011 10:33 AM