Siemens MICROMASTER 420 - Manual (Page 180)

Applicable Standards Issue 07/04
MICROMASTER 420 Operating Instructions
180 6SE6400-5AA00-0BP0
E Applicable Standards
European Low Voltage Directive
The MICROMASTER product range complies with the requirements of the Low
Voltage Directive 73/23/EEC as amended by Directive 98/68/EEC. The units
are certified for compliance with the following standards:
EN 60146-1-1 Semiconductor inverters - General requirements and line
commutated
inverters
EN 60204-1 Safety of machinery - Electrical equipment of machines
European Machinery Directive
The MICROMASTER inverter series does not fall under the scope of the
Machinery Directive. However, the products have been fully evaluated for
compliance with the essential Health & Safety requirements of the directive
when used in a typical machine application. A Declaration of Incorporation is
available on request.
European EMC Directive
When installed according to the recommendations described in this manual,
the MICROMASTER fulfils all requirements of the EMC Directive as defined by
the EMC Product Standard for Power Drive Systems EN61800-3.
Underwriters Laboratories
UL and CUL LISTED POWER CONVERSION EQUIPMENT 5B33 for use in a
pollution degree 2
ISO 9001
Siemens plc operates a quality management system, which complies with the
requirements of ISO 9001.