Motorola MC35 EDA - Manual (Page 23)

2 S y s t e m T o u r
Hardware interface
13
2 Slide the SD/MMC card into the slot and push in until it locks into place.
The card is secure when it is not protruding from the base.
3 Insert the rubber cover back into place.
To remove a storage card:
1
Hold your device securely, then lift the rubber cover from the SD/MMC expansion
slot .
2 Push against the top of the card, as if you were pushing it further into the slot, letting
the card spring out. An audible system sound indicates that the card has been
released.
3 Gently remove the card from the slot.
4 Close the rubber cover.
2