Motorola MC35 EDA User Manual
Page 197
8 U s i n g M C 3 5 C o m p a n i o n P r o g r a m s
Product download-related programs
187
8
Tap Misc(3) tab, then set the following options:
•
Tap the “Use DHCP server” check box to specify whether the AirBEAM
Smart Client uses the DHCP response option 66 to specify the IP
address of the FTP/TFTP server.
If enabled, special RF network registry settings are required to force the
DHCP server to return the “TFTP server name” field (option 66). The
special RF network registry settings are included, but commented out,
in the radio network registry initialization files (essid_xxxx_yy.reg).
•
Tap the “Use DHCP bootfile” check box to specify whether the
AirBEAM Smart Client uses the DHCP response option 67 to specify
the Package and Package 1 parameters.
If enabled, special RF network registry settings are required to force the
DHCP server to return the “Bootfile name” field (option 67). The special
RF network registry settings are included, but commented out, in the
radio network registry initialization files (essid_xxxx_yy.reg).
9
Tap Misc(4) tab, then set the following options: