Motorola MC35 EDA - Manual (Page 149)

7 U s i n g P h o n e
Phone preferences
139
• Block outgoing calls
• All calls - to prevent any calls from being made from your device
• International - to block outgoing international calls
• International except to home country - to block all outgoing international
calls other than those being made to the set home country
• Off - to disable call barring for all outgoing calls
4 Tap ok.
Caller ID
When this service is enabled and you make a call, your phone number will be displayed
on the phone screen of the person you’re calling.
To enable or disable Caller ID:
1
On the services list, tap Caller ID.
2 Tap the Get Settings button (retrieving settings may take a few minutes).
3 On the next screen, define the caller ID settings.
• Everyone - to enable Caller ID
• No one - to disable Caller ID
4 Tap ok.
Call forwarding
This service allows you to forward incoming calls to another phone number. You can
choose to forward all calls to the same number or specify a number based on the
following conditions:
• Unavailable - the phone function is turned off or is out of network service
• Busy - when you are attending to a phone call
• No answer - when you are not answering your phone calls
To enable or disable call forwarding:
1
On the services list, tap Call Forwarding.
2 Tap the Get Settings button (retrieving settings may take a few minutes).
3 On the next screen, follow these steps to enable or disable call forwarding:
• To enable call forwarding:
• Tap the “Forward all incoming phone calls” check box, then specify the
call forward phone number on the “To” field.
- or -
• To forward incoming calls to a different number based on the following
conditions, then specify the call forward phone number on the box
opposite it: