Select\store\ld, 8 select\store\ld, 1 select\store/ld\store – Mocomtech CIM-550 User Manual
Page 78: Select\store/ld\load
CiM-550 IP Enabled Satellite Modem
Rev. 2
Front Panel Menus
CD/CIM550.IOM
52
4.1.8 SELECT\STORE\LD
DISPLAY SELECTIONS/DESCRIPTION
STORE/LOAD CONFIG:
STORE LOAD (PRESS ENTER)
STORE
LOAD
These sub-menus permit the user to store or load
up to 10 different modem configurations in the non-
volatile memory of the modem
4.1.8.1 SELECT\STORE/LD\STORE
DISPLAY SELECTIONS/DESCRIPTION
STORE CONFIGURATION TO
LOCATION: 10 (ENTER)
Select the location to store the current configuration
to, using the UP/DOWN arrow keys, then press
ENTER. Locations 1 through 10 are available.
If the selected location does not contain a previously
stored configuration, the following screen is
displayed:
YOUR CONFIGURATION HAS
BEEN STORED! (ENTER)
If, however, the selected location contains a
previously stored configuration, the following screen
is displayed:
WARNING!LOC 10 CONTAINS DATA!
OVERWRITE? NO YES
Selecting YES will overwrite the existing
configuration at the selected location.
4.1.8.2
SELECT\STORE/LD\LOAD
DISPLAY SELECTIONS/DESCRIPTION
LOAD CONFIGURATION FROM
LOCATION: 10 (ENTER)
Select the location to load a configuration from,
using the UP/DOWN arrow keys, then press
ENTER. Locations 1 through 10 are available.
If the selected location contains valid data, the
following screen will be displayed:
THE NEW CONFIGURATION
HAS BEEN LOADED (ENTER)
If, however, the selected location does not contain
valid data, the following screen will be displayed: