Mocomtech CIM-550 - Manual (Page 280)

CiM-550 IP Enabled Satellite Modem Rev. 2
SNMP interface CD/CIM550.IOM
254
OID Description
cim550ModemTxTrafficFaults Returns the current fault and status codes for the Tx
Traffic. The value will be an integer between 0 and 31
where the bit that is set indicates the fault that has
occurred:
bit 0 Not used, always 0
bit 1 No clock from terrestrial interface
bit 2 Tx FIFO slip
bit 3 AIS Detected on incoming data
bit 4 AUPC upper limit reached
cim550ModemRxTrafficFaults Returns the current fault and status codes for the Rx
Traffic. The value will be an integer between 0 and 255
where the bit that is set indicates the fault that has
occurred:
bit 0 Not used, always 0
bit 1 Demod Unlock
bit 2 AGC alarm
bit 3 Frame Sync lost
bit 4 Buffer underflow
bit 5 Buffer overflow
bit 6 AIS detected on incoming data
bit 7 Eb/No Threshold exceeded