3 select\monit\stored-events, 1 select\monit\events\view, 2 select\monit\stored-events\clear all – Mocomtech CIM-550 User Manual
Page 75
CiM-550 IP Enabled Satellite Modem
Rev. 2
Front Panel Menus
CD/CIM550.IOM
49
4.1.7.3 SELECT\MONIT\STORED-EVENTS
DISPLAY SELECTIONS/DESCRIPTION
STORED EVENTS: VIEW
CLEAR ALL (PRESS ENTER)
VIEW
CLEAR ALL
4.1.7.3.1 SELECT\MONIT\EVENTS\VIEW
DISPLAY SELECTIONS/DESCRIPTION
LOG23: 30/11/97 10:37:32
FT - DEMOD LOCK (UP/DWN)
The event log can store up to 100 events.
When a fault condition occurs, it is time-stamped
and put into the log. Similarly, when the fault
condition clears, this is also recorded, as shown.
LOG24: 30/11/97 10:37:35
OK - DEMOD LOCK (UP/DWN)
4.1.7.3.2 SELECT\MONIT\STORED-EVENTS\CLEAR ALL
DISPLAY SELECTIONS/DESCRIPTION
STORED EVENTS: VIEW
CLEAR ALL (PRESS ENTER)
VIEW
CLEAR ALL
MONITOR:ALARMS RX-PARAMS
STORED-EVENTS STATS AUPC
If the user selects CLEAR ALL, the event log is
cleared, and the user is taken directly back to the
previous menu. However, if there are faults present
on the unit at this time, they will be re-time-stamped,
and new log entries will be generated.
In accordance with international convention, the
date is shown in DAY-MONTH-YEAR format.