Table 12-3. interface configuration fields – Mocomtech CIM-550 User Manual
Page 211
CiM-550 IP Enabled Satellite Modem
Rev. 2
Web Server Pages
CD/CIM550.IOM
185
12.3.6.1 I
NTERFACE
C
ONFIGURATION
This page is used to configure both the Ethernet (LAN) and Satellite (WAN) interfaces.
In addition, control of Baud Rate and Character Format for the both the ‘Remote Control
B’ port and the ‘Console’ Port are provided on this page.
Table 12-3. Interface Configuration Fields
Field
Description
Ethernet MAC Address
The Ethernet MAC address is a unique number assigned by the
factory during assembly of the CiM. This is a read-only parameter.
Ethernet Mode & Speed
The Ethernet Mode & Speed selection defines the type of Ethernet
connection being made to the CiM. The possible selections are:
Auto
10 MB/sec Half Duplex
100 MB/sec Half Duplex
10 MB/sec Full Duplex
100 MB/sec Full Duplex
Ethernet IP Address and
Mask
Specifies the IP Address and Network Mask of the CiM