beautypg.com

Table 13-28. igmp configuration subgroup oids, 1 igmp configuration subgroup – Mocomtech CIM-550 User Manual

Page 265

background image

CiM-550 IP Enabled Satellite Modem

Rev. 2

SNMP interface

CD/CIM550.IOM

239

13.4.2.4 P

ROTOCOLS

G

ROUP

13.4.2.4.1 IGMP Configuration Subgroup

Note: This subgroup will only be accessible in the MIB tree if the IGMP FAST feature has been

purchased and activated. Otherwise, both gets and sets on these OIDs will return errors.

Table 13-28. IGMP Configuration Subgroup OIDs

OID Description

cimIgmpTable

Reports the host groups being routed by the
modem. This table shows the minimum time before
a host group will be put out of service.

cimIgmpEnable

Allows a user to enable or disable the IGMP
feature. When enabled, multicast packets received
from the Satellite Interface are forwarded to the
Ethernet Interface if a host on the Ethernet LAN
has joined the host group via an IGMP report.

cimIgmpQueryPeriod

Defines the time interval (in seconds) in which the
modem sends out its host membership Query
messages.

cimIgmpMaxRespTime

Defines the time interval (in seconds) that the
modem waits before it assumes that no hosts are
interested in the membership query. The max
response time is 25 seconds.

cimIgmpMaxMissBeforeDrop

Number of unanswered queries that must occur
before the modem assume that that group has no
local members and that it need not forward
remotely-originated multicasts for that group onto
the local network.

cimIgmpRecognizeQueries

Allows the modem to respond to a Query by
generating Host Membership Reports, telling each
host group to which it belongs on the network
interface from which the Query was received.

cimIgmpVersionUnsolicitedReports

Defines which version of the IGMP protocol should
be followed when attempting to join a host group
via an unsolicited report.

cimIgmpForceAlertOption

Provides a mechanism whereby routers can
intercept packets not addressed to them directly,
without incurring any significant performance
penalty. Some Cisco routers may require the
definition of a Router Alert Option to recognize a
report from a host to join a host group.

cimIgmpUnsolicitedReportInterval

Configures the modem to generate an unsolicited
report within a specified time intervals (in seconds)
after joining a host group.