Mocomtech CIM-550 - Manual (Page 195)

CiM-550 IP Enabled Satellite Modem Rev. 2
CLI and Telnet Interface CD/CIM550.IOM
169
11.2.7.3 A DMINISTRATIVE D ATABASE O PERATIONS P AGE
The Administrative Database Operations Page is activated from the Operations and
Maintenance Page.
The Database Operations option allows the user to view, save, or erase an existing user
configuration of the CiM. A CiM uses these types of configuration files to initialize itself
on power-up.
The User Configuration File allows a User to over-write the values defined in the Factory
Configuration file. This allows full customization of a CiM without erasing a set of
parameters defined from the factory. The User configuration file can also be retrieved or
overwritten via FTP by specifying the filename ‘param1’.
The Administrative Database Operations Page contains the following options/fields:
Menu Options/Fields Entry Description
Save Parameters to
permanent storage P This option allows a user to save the current
configuration of the CiM to permanent storage. This
configuration will be restored on each successive
power cycle of the CiM.
Restore Factory Default R Restores the CiM settings to “safe” values as defined
by the factory.
Load Parameters from
permanent storage L This option overwrites the current configuration of the
CiM with the configuration last saved to permanent
storage. It allows the user to perform an “Undo” type
operation if the CiM put into an undesirable state by the
user.
Save Parameters S This option allows a user to save the current
configuration of the CiM to permanent storage. This
configuration will be restored on each successive
power cycle of the CiM.
Exit X This option allows a user to exit the current menu and
return to its parent menu.