beautypg.com

Mocomtech CIM-550 User Manual

Page 100

background image

CiM-550 IP Enabled Satellite Modem

Rev. 2

Remote Control

CD/CIM550.IOM

74

Parameter
Type

Command
(Instruction

Code and
qualifier)

Arguments for

Command or

Response to
Query

Description of arguments
(note that all arguments are ASCII numeric

codes, that is, ASCII codes between 48 and 57)

Response to Command

(target to controller)

Query
(Instruction

Code and
qualifier)

Response to

query
(target to
controller)

127 starting at address location 104.
(Used for power-level cal, amongst other things)

Read
EEPROM
Value

N/A

3 bytes

Query only. FACTORY USE ONLY
A query in the form aaa where aaa is a starting bit

address (in the range 0 - 127) within the modem’s

serial EEPROM, requesting that the byte stored at

that location be returned. Example: ERD?063
returns the value of the byte stored at location 063.
(Used for power-level cal, amongst other things)

N/A ERD?

ERD=xxx
where xxx is a

value between 0

and 255

Set RTC
Date

DAY= 6

bytes,

numerical

Command or query
A command in the form ddmmyy, where; dd = day

of the month, between 01 and 31, mm = month of

the year, between 01 and 12 and yy = year,
between 97 and 96 (1997 to 2000, then 2000 to

2096)
Example: DAY=240457 would be April 24, 2057

DAY= (message ok)
DAY? (received ok,
but invalid arguments found)
DAY* (message ok, but not
permitted in current mode)

DAY? DAY=xxxxxx

(same format

as command

arguments)

Set RTC
Time

TIM= 6

bytes,

numerical

Command or query
A command in the form hhmmss, indicating the

time from midnight, where hh = hours, between 00
and 23; mm = minutes, between 00 and 59, and ss

= seconds, between 00 and 59
Example: TIM=231259 would be 23 hours, 12

minutes and 59 seconds from midnight.

TIM= (message ok)
TIM? (received ok,
but invalid arguments found)
TIM* (message ok, but not

permitted in current mode)

TIM? TIM=xxxxxx

(same format

as command
arguments)

Clear All

Stored
Events

CAE= None

Command

only

Instructs the unit to clear all Stored Events
This command takes no arguments.

CAE= (message ok)

N/A

N/A

Set
Statistics

Sample

Interval

SSI= 1

byte,

numerical

Command or Query.
Used to set the sample interval for the Statistics

Logging Function.

SSI= (message ok)
SSI? (received ok,
but invalid arguments found)

SSI?

SSI=x (see
description for

details of

argument)