Mocomtech CIM-550 - Manual (Page 264)

CiM-550 IP Enabled Satellite Modem Rev. 2
SNMP interface CD/CIM550.IOM
238
OID Description
cimIpRouteMaxQosBandwidth Establishes a hard maximum traffic rate that can be
processed by the CiM-550. A value of 0 for this field
implies that no maximum limit is assigned to a route.
This value should be in multiples of 8 Kbps.
Note: The “cimIpRouteDesKey” OID will only be accessible if the Encryption FAST feature
has been purchased and activated. Otherwise, a get will return 1 (clear) and a set
will return an error.
cimIpRouteDesKey Allows the user to specify which Encryption Key should
be used to encrypt traffic for a route. This parameter can
be one of three values: clear, key1, or key2. Clear will
force the CiM-550 to not encrypt any traffic processed for
the route. Key1 will use the key specified in the first key
to encrypt traffic for the route. Key2 will use the second
key to encrypt traffic for the route.
Can be set to:
1 Clear
2 Key 1
3 Key 2
4 Random
cimIpRouteRowStatus Used in get operations to tell if the route table entry is
active. It is used in set operations to tell if a new route
table entry is to be created or an existing route table
entry is to be deleted.
It returns 1 (active) to indicate that the route entry is
available for use by the managed device. The values of
2 (notInService) and 3 (notReady) are not supported.
When a new route entry is created, this OID must be set
to 4 (createAndGo). The value of 5 (createAndWait) is
not supported.
If an existing row is to be deleted this OID must be set to
6 (destroy), which indicates that the user wishing to
delete the route from the route table.
The “cimIpRouteRowStatus” can return:
1 Active
The “cimIpRouteRowStatus” can be set to the following
for row create/delete:
4 Create And Go
6 Destroy
cimIpRoute Priotity Specifies the rooute QoS priority. Ther priority level can
be set to:
1 High
2 Low