Mocomtech CIM-550 - Manual (Page 72)

CiM-550 IP Enabled Satellite Modem Rev. 2
Front Panel Menus CD/CIM550.IOM
46
4.1.6.4 SELECT\INFO\MASK
DISPLAY SELECTIONS/DESCRIPTION
ALARMS MASKED:
RX-AIS TX-AIS
This shows, in the same format as the CONFIG,
MASK sub menu, which alarms are currently
masked. If an alarm is not masked, a blank is
displayed in the relevant screen position.
4.1.6.5 SELECT\INFO\EDMAC
DISPLAY SELECTIONS/DESCRIPTION
FRAMING: ON
EDMAC MODE: ON (SLAVE)
This screen shows the framing mode, EDMAC
mode, and shows if the unit is an EDMAC MASTER
or SLAVE.
4.1.6.6 SELECTINFO\ID
DISPLAY SELECTIONS/DESCRIPTION
CIRCUIT ID
________________________
This displays the user-defined Circuit ID string,
which is entered via the UTIL, ID screen.
4.1.6.7 SELECTINFO\FW
DISPLAY SELECTIONS/DESCRIPTION
FIRMWARE: M&C VER 1.22
IP MODULE VER 1. 1. 0_