Gateway 840 VT-100 - Manual (Page 62)

57
Expanding an array
www.gateway.com
6
Press the up and down arrow keys to select a drive, then press X to mark
that drive for expansion. Continue to select additional drives if necessary,
otherwise press C
TRL + D to continue.
You can cancel your selection by highlighting the drive and pressing R,
or remove all selected drives and start again by pressing C.
7
When you are prompted to save the changes, select Yes , then press E NTER .
8
Press any key to continue.
Adding additional sub-arrays
To add additional sub-arrays:
1
From the Main Menu, select Configuration Menu , then press E NTER . The
Configuration Menu opens.