Gateway 840 VT-100 - Manual (Page 129)

124
Chapter 6: Advanced Configuration and Management
www.gateway.com
Configuring the hardware
The hardware configuration menu provides the options to set the Controller LUN,
configure the controller port connection options, set the controller port data rate,
configure the controller’s RS-232 port BAUD rate, and set the Packetized Data
Transfer/QAS option.
Setting the controller LUN
This option lets the you override the automatic feature which causes the Controller
LUN to automatically use the next available data LUN to communicate between
StorView and the SATA RAID Controller. We recommend that this setting remain in
the automatic mode.
Changing this parameter can alleviate a potential issue that some operating systems
have with a controller showing up at the end of the data LUNs.
In the event you have an operating system that is having a problem with the
controller LUN being displayed, select
Disabled . This will allow the controller to use
the next available data LUN but not be displayed to the operating system.
If the Controller LUN is required to be at a specific, user-defined LUN, choose the
User Defined option and select from 0-511.