Gateway 840 VT-100 - Manual (Page 128)

123
Configuring hot spares
www.gateway.com
4
Press the arrow keys to select an available drive to use:
To add a dedicated spare, press S to assign that drive as a dedicated
spare. Then continue to press S, which displays the arrays from
which you can assign the dedicated spare.
To add a drive as a global spare, press the arrow keys to select an
available drive, then press H key.
To remove a drive as a hot spare, select the drive, then press R, or
press C to remove all drives in the enclosure that are currently
assigned as spares. After the changes have been made, press the C
TRL
+ D to continue.
5
When you are prompted to save the changes, press Y to save the new hot
spare configurations.
6
Press any key to continue.