Gateway 840 VT-100 User Manual
Page 246
241
packetized protocol
parameters
communications
rebuild
parity
checking RAID 5/50
performance
optimizing RAID 5 write
pool spare (global)
Port Data Rate
port name
Q
QAS
R
RAID 5
access alignment
access size
checking parity
drive selection
number of outstanding commands
optimizing
optimizing write performance
sequential access
sub-arrays
write performance
RAID 5 arrays
optimizing
RAID 5/50
full stripe write rate
parity check
partial command cluster rate
RAID 50
checking parity
RAID controllers
accessing
RAID level 0
RAID level 1
RAID level 10
RAID level 5
RAID level 50
RAID Level screen
RAID levels
read only access
read/write access
readahead
command efficiency
command hit rate
statistics
readahead cache
configuring
rebuild parameters
removing hot spare drives
reserve capacity
array
revision
firmware
rewriting parity
RS-232 port settings
,
run-time information
S
SAN LUN mappings
configuration menu
creating
deleting
modifying
terminology
viewing
screen
Add or Remove Global and
Dedicated Spares
Delete Array
Drive Capacity Reserve
Initialize/Trust Arrays
Modify the LUN Availability
RAID Level
Select a logical drive to delete
Select a Logical Drive to Modify
Mapped Number
Select Array
Select Chunk Size
Select LUN for Availability
Sub-Array Selection