Gateway 840 VT-100 User Manual
Page 54
49
Assigning hot spare drives
www.gateway.com
4
Press the arrow keys to highlight an available drive to use, then press S to
assign that drive as a dedicated spare. Continue to press S to display the
arrays from which you can assign the dedicated spare.
To add a drive as a pool spare (global), press the arrow keys to highlight
an available drive and press H.
To remove a drive as a hot spare, highlight the subject drive and press R,
or press C to remove all drives in the enclosure that are currently assigned
as spares.
5
After you make your selection, press C
TRL
+ D to continue.
6
When you are prompted to save the changes, press Y to save the new hot
spare configurations.
7
Press any key to continue, then go to the next chapter,