FUJITSU PRIMERGY BX600 S2 - Manual (Page 75)

PRIMERGY BX600 S2 Basic Unit 75
Server Blades Installation Sequence
Configuration Diagram for 4-way Server Blades
– Slots 3 and 4 are filled first.
– Next, slots 5 through 10 are filled in pairs in numerical order, followed by
slots 1 and 2.
Figure 32: Installation sequence for 4-way server blades
Configuration Diagram for a Mix of 2-way and 4-way Server Blades
– The 4-way server blades are fitted first, followed by the 4-way server blades
– Begin with a 4-way server blade in slots 3 and 4.
Figure 33: Installation sequence for three 2-way and three 4-way server blades
I
2-way server blades with SCSI controller can only be fitted in slots 5 and
6. If only one 2-way server blade with SCSI controller is to be fitted, it
must go in slot 5, with a dummy server blade in slot 6.
8 9 10 1 2 3 4 5 6 7
1 2 3 4
5
8 9 10 1 2 3 4 5 6 7
1 3 4
6
2
D
u
mmy s
e
rv
er b
lade 5