FUJITSU PRIMERGY BX600 S2 - Manual (Page 73)

PRIMERGY BX600 S2 Basic Unit 73
Server Blades Installation Sequence
7.1 Installation Sequence
On the front of the PRIMERGY BX600 S2 basic unit are ten slots for server
blades (numbered 1 - 10 from left to right).
Figure 30: BX600 S2 basic unit with ten 2-way server blades
All ten slots are connected to the infrastructure modules on the back of the
BX600 S2 basic unit via the midplane of the BX600 S2 basic unit:
– Switch blade(s)
– Fibre Channel pass-thru blade(s) (optional)
– Ethernet pass-thru blade(s) (optional)
– Management blade(s)
– KVM blade
– Power supply units
V
CAUTION!
PRIMERGY BX620 S4 server blades are not for use in slots 4 an 10 of
the PRIMERGY BX600 S2 basic unit.
In a PRIMERGY BX600 S2 basic unit different models and configurations of
server blades can be operated alongside each other.
1 2 3 4 5 6 7 8 9 10