FUJITSU PRIMERGY BX600 S2 - Manual (Page 121)

PRIMERGY BX600 S2 Basic Unit 121
FC Pass-Thru Blade Exchanging an FC Pass-Thru Blade
11.4 Exchanging an FC Pass-Thru Blade
V
CAUTION!
● Read the safety information and the information on handling electro-
static-sensitive components in the
section “Components With
Electrostatic-Sensitive Devices” on page 25 .
● The FC pass-thru blade must always be installed in slots and NET3
first (see
page 117 ).
Removing the FC pass-thru blade
Figure 74: Disengaging the FC pass-thru blade
Ê Press the spring on the underside of the eject handle to unlock it.