beautypg.com

FUJITSU PRIMERGY BX600 S2 User Manual

Page 127

background image

PRIMERGY BX600 S2 Basic Unit

127

Management Blade

Control and Connection Panel

The following table shows the conditions of the management blades indicated
by the interaction of master indicator and failure indicator LEDs.

4

LAN active indicator (amber LED)

Lights amber: The LAN is active.

Blinks amber: Boot up power ready indicator.

5

I2C connector

Proprietary I2C (IPMI) connector for Fujitsu Siemens Computers service
applications.

6

Failure indicator (amber LED)

Dark:

This management blade is OK (see table below).

Lights amber: If only one management blade is present: this blade has

failed (see table below).

Blinks amber
(2 sec.):

Management blade is running in power up mode (gener-
ating heart beat for master/slave selection).

7

Master indicator (green LED)

Unlit:

This management blade is a slave (standby), backup of
the master management blade (see table below).

Lights green:

This management blade is the master, responsible for
the entire system management (see table below).

Blinks green:

This management blade is in special mode

Management blade condition

Master indicator

(green LED)

Failure indicator

(amber LED)

One management blade is
installed and alive

ON

OFF

Two management blades are
installed

ON (Master)

OFF (Slave)

OFF

One management blade is
installed and hangs up

ON

ON

Two management blades are
installed and both hang up

ON

ON