FUJITSU PRIMERGY BX600 S2 - Manual (Page 145)

PRIMERGY BX600 S2 Basic Unit 145
Power Supply Concept Power Supply Units
Figure 93: Removing the PSU
Ê Pull the PSU out of the slot.
V
CAUTION!
Be careful! The PSU can be very hot!
To mount a PSU follow these instructions in reverse order.
14.1.2 Adding a Power Supply Unit
Depending on the desired configuration, the system can be upgraded with one
or two additional power supply units.
V
CAUTION!
Read the safety information in the chapter “Important Notes” on page 21 .