FUJITSU PRIMERGY BX600 S2 - Manual (Page 45)

PRIMERGY BX600 S2 Basic Unit 45
Installing the Hardware Connecting External Devices
4.4.2 Instructions on Connecting and Disconnecting
Cables
V
CAUTION!
Make sure you read the documentation on the devices before connecting
them.
Do not connect or disconnect data cables during a thunderstorm.
When removing a cable, always hold it by the plug.
Connect and disconnect the cables in the order described below.
Connecting Cables
Ê Turn off all power and equipment switches.
Ê Pull all power plugs out of grounded power sockets or CEE sockets.
Ê Plug all cables into the system and peripherals. Secure the data trans-
mission cable connections (e.g. nut retention).
Ê Plug all data communication cables into the utility sockets.
Ê Plug all power cables into the grounded power sockets or CEE sockets.
Disconnecting Cables
Ê Turn off all power and equipment switches.
Ê Pull all power plugs out of grounded power sockets or CEE sockets.
Ê Unplug all data communication cables from the utility sockets.
Ê Undo the nut retention on the connector housings and pull the corre-
sponding cables out of the basic unit and the peripherals.