FUJITSU ServerView V6.00 - Manual (Page 93)

ServerView Event Manager 93
Trap overview
communication
Established 8 Communication is established
between the agent and power
supply. informational
communicationLost 1 Communication between the
agent and power supply was
interrupted. major
contactFault 18 One of the contacts on the
Measure UPS has changed
from its default position. major
contactFaultResolved 19 An error on one of the
Measure UPS contacts has
been resolved. informational
hardwareFailure
Bypass 20 The UPS is on bypass due to a
hardware failure. major
lowBattery 7 The UPS system batteries are
low and will soon be
exhausted. If utility power is not
restored the UPS will put itself
to
sleep and immediately cut
power to the load.
major
powerRestored 9 Utility power has been restored
after the occurrence of an
upsOnBattery condition.
informational
restartAgent 29 The agent was restarted on the
command of the manager. informational
returnFromBypass 23 The UPS has returned from
bypass mode. informational
returnFromLowBattery 11 The UPS has returned from a
lowBattery condition.
informational
smartAvrReducing 31 The UPS has enabled
SmartAVR voltage reduction. minor
smartBoostOn 6 The UPS has enabled
SmartBoost .
minor
Trap name ID Meaning Error class
Table 20: APC traps