FUJITSU ServerView V6.00 - Manual (Page 107)

ServerView Event Manager 107
Trap overview
FscDdmNameChanged 1414 After the driver has
changed the name of a
DuplexWrite group.
informational
FscDdmPathFailed 1415 After the driver has
detected an error on one
path of a MultiPath group.
critical
FscDdmRetry 1416 After the driver has
detected an error on one
path of a MultiPath group
and the retry of the
command was successful
on another path.
major
FscDdmActivePortChang
ed 1417 After the driver has
changed the active path of a
MultiPath group.
informational
FscDdmReconfigured 1418 Change has been detected
detected in the MultiPath
configuration.
informational
FscDdmStatusChanged 1419 After the driver has
changed the status of a
MultiPath path.
informational
FscDdmAutoRecovered 1420 After the driver has enabled
a path of a MultiPath group
(AutoRecovery).
informational
FscDdmErrorCleared 1421 After the driver has cleared
the error status of a
MultiPath path.
informational
FscDdmPnPRemove 1422 After the driver has
detected a Plug and Play
Removal.
informational
FscDdmPnPNew 1423 After the driver has
detected a Plug and Play
Add.
informational
Trap name ID Meaning Error class
Table 24: DDM-Traps