FUJITSU ServerView V6.00 - Manual (Page 41)

ServerView Event Manager 41
Alarm rules
Alarm Rules tab
The Alarm Rules tab is used to assign alarm rules to alarms, servers and
alarm destinations.
The first column lists all known alarm rules. The enabled column indicates
which alarm rules are activated (checkmark) and which are deactivated.
By clicking in the
enabled column you can set or remove a checkmark.
You save the new setting by clicking the Apply button.
The second column lists the alarms that are assigned to the selected
alarm rule. Only alarms assigned to the alarm rule are forwarded.
The third column shows the servers that are assigned to the selected
alarm rule. Only alarms from assigned servers are forwarded by an alarm
rule.
The fourth column shows all destinations of the incoming alarms for the
selected alarm rule.
With the Add button you can define new alarm rules. A window opens for
you to enter the new name of the alarm rule. With the Edit button you can
modify an existing, selected alarm rule, and with the Delete button you
can delete an existing alarm rule.
Alarms tab
The Alarms tab provides an overview of which alarms are assigned to
which alarm rules. So you can quickly check which, if any, destination is
assigned to an alarm.
The first column lists all known alarms in alphabetical order. Because the
alarms are defined by many different manufacturers, the same name can
be used twice.
The second column lists all the alarm rules to which the selected alarm
is assigned.
The third column shows the servers that are assigned to the alarm rule
selected in column two. Only alarms from assigned servers are
forwarded by an alarm rule.
The fourth column shows all destinations of incoming alarms for the
selected alarm rule.