FUJITSU ServerView V6.00 - Manual (Page 153)

ServerView Event Manager 153
Trap overview
tapeAlertTrap39 39 The tape drive may have a
hardware fault. Run
extended diagnostics to
verify and diagnose the
problem. Check the tape
drive users manual for
device specific instructions
on running extended
diagnostic tests. minor
tapeAlertTrap40 40 The changer mechanism is
having difficulty
communicating with the
tape drive:
1. Turn the autoloader off
then on.
2. Restart the operation.
3. If problem persists, call
the tape drive supplier
helpline.
critical
tapeAlertTrap41 41 A tape has been left in the
autoloader by a previous
hardware fault:
1. Insert an empty
magazine to clear the
fault.
2. If the fault does not
clear, turn the
autoloader off and then
on again.
3. If the problem persists,
call the tape drive
supplier helpline.
critical
tapeAlertTrap42 42 There is a problem with the
autoloader mechanism. minor
Trap name ID Meaning Error class
Table 45: Tape traps