FUJITSU ServerView V6.00 - Manual (Page 83)

ServerView Event Manager 83
5 Traps
If a special event occurs in a network component, then the SNMP agent can
send a message to one or more managers to inform them of the event. Such
messages are called traps in SNMP. The manager can react to events in the
network based on the incoming trap. A trap can be uniquely identified with the
trap ID and MIB OID.
I
In WBEM (Web-Based Enterprise Management) environments CIM
providers send events as CIM indications. CIM indications largely
correspond to the traps defined in the SC2.MIB. However, depending on
the CIM providers installed in a management environment, there may be
some events (traps) defined in the SC2.MIB for which no corresponding
indications are sent.
5.1 Displaying trap information
The Event Manager help system provides detailed information on the default
MIBs and traps supported by the Event Manager.
You open the relevant overview window either via the Event Manager start
window or via the
Alarm Monitor window.
– Trap information via Event Manager start window:
Ê Start the Event Manager.
Ê Under Help , select On Suite .
Ê Then under Event Management , select Alarm Monitor .
Ê In the window that opens, click the Event Manager link.
Ê Under Alarms , select the Agent Alarm Information option.
– Trap information via Alarm Monitor window:
Ê Start the Event Manager.
Ê Under Event Management , select Alarm Monitor .
Ê In the Alarm Monitor window, select Help – On Alarm Monitor from the
menu bar.
Ê In the window that opens, click the Event Manager link.