FUJITSU ServerView V6.00 - Manual (Page 154)

154 ServerView Event Manager
Trap overview
tapeAlertTrap43 43 The operation has failed
because the autoloader
door is open:
1. Clear any obstructions
from the autoloader
door.
2. Eject the magazine and
then insert it again.
3. If the fault does not
clear, turn the
autoloader off and then
on again.
4. If the problem persists,
call the tape drive
supplier helpline.
critical
tapeAlertTrap44 44 The autoloader has a
hardware fault:
1. Turn the autoloader off
and then on again.
2. Restart the operation.
3. If the problem persists,
call the tape drive
supplier helpline.
critical
tapeAlertTrap45 45 The autoloader cannot
operate without the
magazine.
1. Insert the magazine into
the autoloader.
2. Restart the operation.
critical
tapeAlertTrap46 46 A hardware failure of the
changer mechanism is
predicted. Call the tape
drive supplier helpline. minor
Trap name ID Meaning Error class
Table 45: Tape traps