Adaptec traps (duralink.mib), Apc traps (powernet.mib), 1 adaptec traps (duralink.mib) – FUJITSU ServerView V6.00 User Manual
Page 92: 2 apc traps (powernet.mib)
92
ServerView
Event
Manager
Trap overview
5.3.1
Adaptec traps (Duralink.mib)
MIB-OID: 1.3.6.1.4.1.795.3.1.2.3
This section lists Adaptec traps in alphabetical order.
5.3.2
APC traps (Powernet.mib)
MIB-OID: 1.3.6.1.4.1.318
This section lists the APC traps in alphabetical order.
Trap name
ID
Meaning
Error class
duralinkStatusTrap
1
The link status has
changed.
informational
failoverStatusTrap
1
The failover status has
changed.
informational
Table 19: Adaptec traps
Trap name
ID
Meaning
Error class
baseFanFailure
25
The base module bypass
power supply is defective.
major
batteryPackComm
Established
27
The UPS can communicate
with the external battery pack.
informational
batteryPackCommLost
26
Communication with external
battery packs interrupted.
major
bypassPowerSupply
Failure
24
The base module bypass
power supply is defective.
major
calibrationStart
28
A test to determine the battery
strength has been initiated by
the UPS.
informational
codeAuthentication
Done
32
Authentication based on the
agent code image has been
completed.
informational
Table 20: APC traps