FUJITSU ServerView V6.00 - Manual (Page 22)

22 ServerView Event Manager
Viewing alarms
The icons have the following meanings:
● In the bottom right section of the window you can find out information on the
selected alarm entry in the alarm list via the two or three tabs provided:
– Alarm Details tab - contains a brief description of the selected alarm entry
in the alarm list.
– Alarm Information tab - contains detailed information on the selected
alarm entry as stored in the MIB.
– Server Information tab - provides information on the server from which the
selected alarm entry originates. Under General Information you will see
general information about the server (e.g. system name, IP address,
community name) and under
Additional Information you will see additional
information as stored in the Server Properties (e.g. administrator,
location, model).
On this tab you will also find a link, depending on whether the server in
question is entered in the ServerView server list or not.
Indicates the alarm level.
The alarm was written to the local event log.
This alarm triggered a pager call.
A mail was sent for this alarm.
A broadcast message was sent for this alarm.
An executable program was triggered by this alarm.
This alarm was forwarded to the management station.
Table 3: Icons in the Alarm Monitor