Fortinet FortiGuard Analysis 1.2.0 - Manual (Page 48)

FortiGuard Analysis and Management Service Version 1.2.0 Administration Guide
48 13-12000-406-20081031
Topology Tool Management
Topology Tool
The Topology Tool tab, similar to the Topology tab found on most devices, allows
you to create and save a diagram of your specific network. Multiple network
diagrams can also be created and saved on the service’s servers, which can then
be retrieved whenever needed.
The Topology Tool tab provides all the things you need to create a network
diagram, such as Fortinet device icons, connector lines, and text boxes. There are
also two modes to select from: View mode displays the network diagram and Edit
mode provides what you need to create a network diagram.
Figure 24: Network diagram in View mode
Note: The View Mode / Edit Mode button acts as a toggle, so that when you are in one
mode, the text displayed indicates that selecting it will switch the display to the other mode.
For example, if you are in Edit mode, the text displays “View Mode”, indicating that
selecting the button will switch you to the View mode.
Topology Tool section menus