Fortinet FortiGuard Analysis 1.2.0 - Manual (Page 43)

Management Device
FortiGuard Analysis and Management Service Version 1.2.0 Administration Guide
13-12000-406-20081031
43
Running scripts
You can run scripts or schedule when a script runs from the Tasks section of the
Device menu. Scripts allow you to deploy identical configuration items to many
devices. Scripts are configured from configuration backup files which are then
uploaded to the portal web site. For more information about scripts and
configuring them, see
“Scripts” on page 46 .
To run a script
1 Go to Management > Device > Device Detail.
2 In the Tasks section, select Run Script.
3 Enter the appropriate information for the following:
4 Select Submit.
Viewing available firmware images
When you select the Show Applicable Firmware link in Tasks, all available
firmware images on the FDN appear. This list includes FortiOS 2.80 firmware and
patch releases.
Figure 22: Firmware images (including FortiOS 2.80)
Note: Instead of restoring a previous configuration, you can also apply a configuration
script. For more information, see
“Scripts” on page 46 .
!
Caution: Verify configuration scripts before deployment. Deploying a configuration script
that alters host name, IP address, or the service settings can result in interrupted
connectivity.
Scheduled Time
(GMT:) Select one of the following:
•
Time – Enter the time period in the field or use the Calendar
icon. The script will run at the specified time you enter.
• ASAP – Select to immediately run the script after you select
Submit.
Script Select the name of the script you want to run from the list.