HP XW3400 - Manual (Page 50)

Deleting a power-on or Setup password
If the system is equipped with an embedded security device, refer to the HP ProtectTools Security Manager
Guide at www.hp.com .
1 . Turn on or restart the workstation. If you are in Windows, click Start > Shut Down > Restart the
Computer.
2 . To delete the Power-On password, go to step 3.
To delete the Setup password, as soon as the workstation is turned on, press F10 when the monitor
light turns green to enter Computer Setup. Press Enter to bypass the title screen, if necessary.
NOTE: If you do not press F10 at the appropriate time, you must restart the workstation and again
press F10 when the monitor light turns green to access the utility.
3 . When the key icon appears, type the current password followed by a slash (/) or alternate delimiter
character as shown: current password/
4 . Press Enter .
NOTE: Refer to National keyboard delimiter characters on page 40 for information about the
alternate delimiter characters. The power-on password and setup password may also be changed
using the Security options in Computer Setup.
National keyboard delimiter characters
Each keyboard is designed to meet country-specific requirements. The syntax and keys that you use to
change or delete the password depend on the keyboard that came with the workstation.
National Keyboard Delimiter Characters
Arabic / Greek - Russian /
Belgian = Hebrew . Slovakian -
BHCSY* - Hungarian - Spanish -
Brazilian / Italian - Swedish/Finnish /
Chinese / Japanese / Swiss -
Czech - Korean / Taiwanese /
Danish - Latin American - Thai /
French ! Norwegian - Turkish .
French Canadian é Polish - U.S. English /
German - Portuguese -
* For Bosnia-Herzegovina, Croatia, Slovenia, and Yugoslavia
Clearing passwords
If you forget the password, you cannot access the workstation. Refer to the Troubleshooting Guide on
the Documentation and Diagnostics CD for instructions on clearing passwords.
40 Chapter 4 Desktop management ENWW