beautypg.com

Enww post numeric codes and text messages 113 – HP XW3400 User Manual

Page 123

background image

Control panel message

Description

Recommended action

2202-PMM Deallocation Error during MEBx

cleanup

Memory error during POST execution of the

Management Engine (ME) BIOS Extensions

option ROM

1

.

Reboot the workstation.

2

.

Unplug the power cord, re-seat the

memory modules, and reboot the

workstation.

3

.

If the memory configuration was recently

changed, unplug the power cord, restore

the original memory configuration, and

reboot the workstation.

4

.

If the error persists, replace the system

board.

2203-Setup error during MEBx execution

MEBx selection or exit resulted in a setup

failure.

1

.

Reboot the workstation.

2

.

Unplug the power cord, re-seat the

memory modules, and reboot the

workstation.

3

.

If the memory configuration was recently

changed, unplug the power cord, restore

the original memory configuration, and

reboot the workstation.

4

.

If the error persists, replace the system

board.

2204-Inventory error during MEBx execution

BIOS information passed to the MEBx resulted

in a failure.

1

.

Reboot the workstation.

2

.

If the error persists, update to the latest

BIOS version.

3

.

If the error still persists, replace the

system board.

2205-Interface error during MEBx execution

MEBx operation experienced a hardware

error during communication with ME.

1

.

Reboot the workstation.

2

.

If the error persists, update to the latest

BIOS version.

3

.

If the error still persists, replace the

system board.

Invalid Electronic Serial Number

Electronic serial number has become

corrupted.

1

.

Run Computer Setup. If Setup already

has data in the field or will not allow

the serial number to be entered,

download from

http://www.hp.com

and run SP5572.EXE (SNZERO.EXE).

2

.

Run Computer Setup and try to enter

serial number under Security, System ID,

then save changes.

Network Server Mode Active and No

Keyboard Attached

Keyboard failure while Network Server Mode

enabled.

1

.

Reconnect keyboard with workstation

turned off.

2

.

Check connector for bent or missing pins.

3

.

Ensure that none of the keys are

depressed.

4

.

Replace keyboard.

Table C-1

Numeric Codes and Text Messages (continued)

ENWW

POST numeric codes and text messages 113