Interlogix TruVision NVR 10 User Manual - Manual (Page 93)

Chapter 11: Controlling a PTZ camera
TruVision NVR 10 User Manual 87
To set up a preset tour:
1. From the menu toolbar, click PTZ Settings > General .
2. Select the preset tour number.
3. In the preset tour toolbar, click to add a step to the preset tour. The Step pop-up
window appears. Select the preset number, dwell time, and speed of the step. Click
OK to save the settings.
Note: A preset tour should have at least two presets.
4. Repeat step 3 to configure other steps in the preset tour.
5. Click Back to return to live view.
To delete a preset tour:
1. From the menu toolbar, click PTZ Settings > General .
2. From the preset list, select a tour number and click to delete the selected the
preset tour.
– Or –
In the preset tour toolbar, click to delete all the presets for the selected tour.
3. Click Back to return to live view.
To call up a preset tour:
• PTZ control panel:
1. In live view, left-click the mouse and select the PTZ control icon in the quick access
toolbar. The PTZ control panel appears. Select the desired camera from the toolbar.
– Or –
On the front panel, select the desired camera and press Enter to call up the quick
access toolbar. The PTZ control panel appears.
2. Scroll the toolbar to Tour and double-click the desired preset tour from the list. The
camera immediately carries out the preset tour movement.
• Menu toolbar:
1. From the menu toolbar, click PTZ Settings > General .
2. Select the desired preset tour from the list and click to start the tour. Click to
stop the preset tour.
3. Click Back to return to live view.