Interlogix TruVision NVR 10 User Manual - Manual (Page 43)

Chapter 6: Alarm settings
TruVision NVR 10 User Manual 37
Click Full screen to activate the whole window or Clear to clear the window.
Note: The motion grid is sensitive to motion during configuration.
5. Set the sensitivity level.
Drag the Sensitivity scroll bar to the desired sensitivity level. The highest value is on
the right of the bar.
6. Select the cameras that will record the motion detected.
Click the Settings button. The Settings window appears. Click the Trigger
Channel tab and select the cameras that will record when a motion alarm is
triggered. Click Apply to save the settings.
7. Select the recording schedules for motion detection.
In the Settings window, click the Arming Schedule tab and select the day of the
week and the time periods during the day when motion can be detected. You can
schedule up to eight time periods in a day. Default is 24 hours.
Click Apply to save the settings. Click Copy to copy the settings to other days of
the week.
Note: Time periods defined cannot overlap.